10% off all online orders with the code "ZKR10"

Aeropress

Brewing Guide

Aeropress

Background

People new to the AeroPress always ask: “What’s so special about it?” There are a few things that contribute to its fame and popularity. First of all, AeroPress is an inexpensive device. The AeroPress is not only one of the least expensive brewers on the market. Many people love it because of its cleaner cup and milder taste, at the same time having a rich and complex taste. AeroPress is a milder version of espresso, if brewed correctly. Some drip coffee lovers enjoy the stronger coffee made with the AeroPress, but the bolder flavor of espresso is too much for them.

Probably, the greatest advantage of the AeroPress is its versatility. Using Aeropress is a constant surprise, you can always brew a totally different cup, yet equally great. As a manual brewing method, you can tweak your final cup in many ways.

Step 1

Bring 200g of water to boil. Weigh out 15–18 grams of coffee (depending on your preferred strength). Grind to a texture slightly finer than sea salt.

Step 2

Place a paper filter in the AeroPress’ detachable plastic cap.

Step 3

Use some of your hot water to wet your filter and cap. The water serves a dual function here: It helps the filter adhere to the cap and heats your brewing vessel. After wetting filter and cap, hold the cap by its “ears” and pour the water very slowly so it can be absorbed by the filter.

Step 4

Assemble your AeroPress. Make sure the entire assembly is dry, since any residual moisture can compromise the seal of the device.

Step 5

Add your ground coffee. Be careful not to spill any grounds into the ring-shaped gutter at the top of the AeroPress.

Step 6

Add twice the weight of water than you have grounds (e.g., for 15 grams coffee, add 30 grams water). The water should be about 90-95 degrees.

Step 7

Make sure the coffee is saturated evenly, stirring it with a wooden spoon, or stick if necessary, and let it sit for 30 seconds.

Step 8

Fill the chamber with the remainder of the hot water.

Step 9

After about 30 seconds, stir the grounds 10 times to agitate.

Step 10

Fasten the cap while ensuring that it locks into the grooves tightly. Flip the whole assembly over with swiftness and control. Position it atop your brew vessel and begin to apply downward pressure. You will experience about 30 pounds of resistance here. If the pushing feels too easy, your grind is likely too coarse; if it is very hard to push, the grind might be too fine. Your coffee is fully brewed once it begins to make a hissing sound. This means there is no more water to push through the device.

Step 11

Once you have unscrewed the cap, you can pop out the filter and the puck of condensed grounds by simply pushing AeroPress’s interior section a final inch.

Step 12

Pour your coffee in cups right away and enjoy!